Platform dimensions: 120 cm x 205 cm

In the set: platform with mountings (8 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings (6 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Application: Toyota Land Cruiser J70+ (short)

Dimensions: 120 cm x 170 cm

The More 4x4 roof rack structure is made of steel, coated with black powder paint, and equipped with a textured coating on the outside.

On the sides of the rack, the mounting points for LED lights are located, while the attachment points for LED panels are positioned at the front. The platform consists of two parts, with a flat surface on top suitable for mounting rooftop tents. On the upper surface of the off-road rack, there are holes for easy installation of cargo nets and for positioning other items to be secured.

Included with the roof rack are the necessary bolts (6 pieces)

More4x4 Offroad roof rack Isuzu Trooper I long 1983-1991

Platform dimensions: 120 cm x 205 cm

In the set: platform with mountings (8 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings (6 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings (6 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 130 cm

In the set: platform with mountings (4 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings (4 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 145 cm x 220 cm

In the set: platform with mountings (8 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Recommended for: Volkswagen Amarok, 2023+, double cab
Platform dimensions: 120 cm x 130 cm
Set contents: B004 platform with BA0 36 mounting

Accessories:
The More 4x4 roof rack dedicated to the Volkswagen Amarok is a three-dimensional steel structure, galvanized, powder-coated in black, and externally finished with structural paint.

On the front of the roof rack, there is a place for mounting the vehicle's front lighting in the form of long-distance halogen lights or LED panels with a maximum width of 80 cm. Within the rear and side parts of the roof rack, there are also mounting places for four dedicated work lights (BA006). This solution protects the lights and their installation from mechanical damage.

The platform is flat at the top and is suitable for mounting roof tents. On the upper surface, the offroad rack has holes for easy installation of luggage nets and screwing in any individual mountings.

More 4x4 off-road roof racks undergo a shot-blasting, electro-arc spray galvanizing, and then are powder-coated with Sahara polyester layer with increased abrasion resistance and Pękana Pustynia structural paint.

The indicated price applies to the complete platform with dedicated fittings for the Volkswagen Amarok, excluding lighting costs.
Product designed and made in Poland

Platform dimensions: 120 cm x 130 cm

In the set: platform with mountings

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 130 cm x 170 cm

In the set: platform with mounts (6 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 170 cm

In the set: platform with mountings

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 205 cm

In the set: platform with mountings (8 pcs)

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Platform dimensions: 120 cm x 130 cm

In the set: platform with mountings 

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

Application: Enlarged cabin (King cab)

Platform dimensions: 120 cm x 130 cm

In the set: platform with mountings

The More 4x4 roof rack has a spatial steel structure, powder coated in black and with a structure finishing on the outside. 

On the sides of the offroad boot platform there are fixings for LED work lamps and a fixture for LED panels at the front of the boot. 

The platform is flat at the top and adapted for mounting roof tents. On the upper surface, the offroad trunk has holes for easy mounting of luggage nets and for screwing any individual fasteners.

To intall the roof rack, holes must be drilled in the roof of the vehicle in the railing strips and attach the platform mount with rivet nuts (supplied).