Olight Marauder 2 is a next generation of the legendary searchlight X7R, this time with even higher performance and more compact size. Olight has always been a pioneer in high-efficiency lighting in a small format, and the Marauder 2 is no exception. Squeezing an incredible 14,000 lm into a lamp that fits in your pocket is certainly no easy task. Unlike similar lights of the same size, the Marauder 2 offers a very wide light pattern as well as a powerful spot beam, which provides a range of a full 800 meters. Therefore, this lamp is suited for illuminating large areas as well as for other situations where you need maximum reach. Warranty 60 months.
The Marauder 2's light beam is created through the innovative lens technology: on the edges of the lamp are 12 LEDs that provides a wide beam, while the large lens in the center creates a very powerful and sharply defined spot. The narrow searchlight beam ensures that the entire lamp's effect is concentrated straight ahead, in order to achieve the longest possible range. In addition, it limits all unnecessary stray light, which is beneficial when used on water because it prevents the stray light from being reflected in the water surface and blinding the user.
Marauder 2 is equipped with an efficient USB-C charger, which is up to three times faster than standard USB chargers! The lamp's battery can also be used as a power bank to charge the mobile phone. The lens has an intelligent sensor that limits the effect when the lens is covered or directed at a nearby target. This ensures that the lamp does not cause damage if the lens is accidentally covered. The lamp body is made of very durable aircraft aluminum, and is fully waterproof and shockproof according to the IPX8 standard. In addition, it is covered with a rubbery material that provides a better grip and prevents the lamp from slipping out of your hand in wet weather.
Technical specification
- Brand and model: Olight Marauder 2
- Light cone: Wide + narrow
- Effect modes: 7 + strobe
- Manufacturer's reported luminous flux: 14000 lm
- Manufacturer's reported range: 800 m
- Material and color: Type III hard anodized aluminum, stainless steel, black
- Largest dimensions: 140 x 79 mm
- Weight (incl. battery): 750 g
- Protection class: IPX8
- Warranty: 60 months
Burning time (manufacturer's information)
Flood
- Level 7: 14000 -> 3200 -> 1500 lm / 5 + 140 + 45 min
- Level 6: 6400 -> 3200 -> 1600 -> 800 lm / 13 + 120 + 40 + 22 min
- Level 5: 3200 -> 1600 -> 800 -> 400 -> 130 lm / 90 + 90 + 10 + 10 + 70 min
- Level 4: 1600 lm / 7 h 30 min
- Level 3: 800 lm / 13 h
- Level 2: 400 lm / 22 h
- Level 1: 200 lm / 40 h
Quick guide
Remove the lens protective film before using the lamp for the first time!
The lamp is delivered with the button lock activated. Open the button lock by turning the power mode switch 90°, so that the marker lights around the switch light up for 3 seconds.
Turn the light on and off by pressing the power button once. The lamp always lights up on the same power mode it was last used on (apart from power mode 7). Modes 5 and 6 are saved in the memory for 10 minutes, then the lamp lights up in mode 4. Change power mode by turning the power mode switch clockwise (power increases) or counter-clockwise (power decreases). The maximum mode is activated by double-clicking the power switch while the lamp is on. Strobe mode is activated with a triple click.
The shape of the light cone (wide or narrow) is selected via the slide switch below the switch.
The lamp automatically activates the key lock after being inactive for 30 seconds.
Charging: Screw the bottom piece counterclockwise to access the charging port. Connect one end of the charging cable to the charging port and the other to the AC adapter.
