Kalgum Rear Suspension Bushing Kit - Jeep Wrangler JL

Jeep Wrangler JL Rear Suspension Bushing Kit

⭐ JEEP WRANGLER JL (IV) 2017 -

Polyurethane bushings  and silentblock made  entirely - undivided , with a hardness of 80 Sha, navy blue.

Our polyurethane bushings  for the Jeep Wrangler JL are a one-piece element and, according to the instructions,  should be installed by pressing using an appropriate press.

Lubrication of polyurethane bushings  in control arms is important because polyurethane – unlike rubber – rotates around the metal bushing and may squeak without lubrication.

Fits vehicles

Jeep WRANGLER IV (JL):

• 2.0 (2.0) 1995ccm 270KM/199kW 2017-
• 2.0 T-GDi (JL72, JL74) (EC1) 1995ccm 270KM/199kW 2017/11-
• 2.2 (2.2 CRD) 2143ccm 200KM/147kW 2017-
• 2.2 Multijet II (JL72, JL74) (EBH) 2143ccm 200KM/147kW 2017/11-
• 3.6 VVT (JL72, JL74) (ERC) 3604ccm 284KM/209kW 2017/11-

 Rear suspension contents:

• Rear/Upper Control Arm Bushing (No. 746) x 4 pcs.
• Rear/lower control arm bushing (no. 641) x 4 pcs.
• Rear panhard rod bush x 2 pcs.
• Rear stabilizer bar bushing (no. 1133) x 2 pcs.

How often should I re-lubricate?

It depends on the conditions and how the car is used:

Car used every day (city/highway)

• Inspection every 10–15 thousand km
• Re-lubrication usually every  1-2 years if no symptoms

Dynamic driving / track / off-road

• Inspection every  5–10 thousand km