Quick Fist Mini
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter.
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50 lbs (23 kilos).
• Mounts easily with one #10 bolt.
• Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)
(w/o VAT:12.44 €)
Quick Fist Original
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter.
• Each clamp supports a safe working load of 25lbs (11 kilos).
• 2 clamps support 50 lbs (23 kilos).
• Mounts easily with one #10 bolt.
• Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)
(w/o VAT:14.71 €)
Quick Fist 3
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
- 70-83 mm diameter
- 23 kg load capacity
- 1 pc/package
(w/o VAT:24.87 €)
Quick Fist Super
The description was translated by artificial intelligence
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
• Holds objects from 2.5" to 9.5" (64 to 240mm) in diameter.
• Each clamp supports a safe working load of 50lbs (23 kilos).
• 2 clamps support 100lbs (45 kilos).
• Mounts with three #10 bolts or screws.
• Mounting area: 6" x 7/8" (152 x 22mm).
(w/o VAT:16.95 €)
QUICK FIST XL CLAMP
QUICK FIST XL CLAMP
• Two 14’’ (356mm) separate straps hold round objects up to 15” (381mm) in diameter.
• Holds equipment measuring up to 28” (711mm) in linear distance.
• Each clamp supports a safe working load of 150lbs. (68 kilos) with a break-strength of 300lbs. (176 kilos).
• Two clamps support 300lbs with a break-strength of 600lbs (272 kilos).
• Each half of the clamp mounts with four #10 screws or bolts.
• Mounting Area: 2” x 2” (51mm x 51mm)
(w/o VAT:32.77 €)
Quick Fist Long Arm
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
- 13-114 mm diameter (1/2"-4,5")
- 1 pc/23 kg load capacity
- 2 pcs/55 kg load capacity
- 2 pcs/package
(w/o VAT:31.66 €)
Quick Fist Belt Mount
Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
Quick Fist Belt Mount
- 4 pc mountain post
- 1 pc connector
- 2 pc tie down 38" (965x38x6mm)
- 4 pc hooks
(w/o VAT:33.9 €)
Quick Fist Mounting Kit
Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.
Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.
Quick Fist Mounting Kit
A szett tartalma:
- 2 db Quick Fist Mini
- 4 db Quick Fist Original
- 2 db Quick Fist Super
(w/o VAT:65.56 €)
MorE4x4 Folding reclining surface - for Toyota Land Cruiser J120
Suitable for: Toyota Land Cruiser J120 (2002-2009) LWB
The sleeping platform can be opened and, when folded, only 6 cm behind the backrest of the Toyota Land Cruiser J120.
You can use Toyota's full boot space on a daily basis and easily open the reclining surface in a minute
There is a 25 cm luggage compartment under the platform.
The bracket follows the shape of the Land Cruiser floor, and requires a total of 8 holes to be drilled for installation with the included M10 screws.
The product is made of steel: horizontal surface - 2 mm, fastening - 6 mm.
The whole black is powder coated.
(w/o VAT:643.39 €)
All4Adventure CampBoss Cape York Camp Chair
All 4 Adventure CampBoss Cape York Camp Chair
- A fully-padded chair designed for comfort with high-back support and neoprene headrest
- Combination of rugged 1200D polyester fabric, with microfibre body insert
- Superior strength 22mm steel frame, with powder coated finish
- Cross-bracing hubs on front and sides for extra reinforcement
- Enhanced weight rating due to front vertical stabilising legs
- Convenient side-storage pouch with organiser pockets
- Insulated drink holder
- One in-arm zippered insulated pocket
- Heavy-duty zippered bag with carry handles
- 150kg weight rating
- Packed size – 101cm x 25cm x 25cm
- Seat height 47 cm
- Weight – 8.5kgs
- 1-Year Manufacturer’s Warranty against defects of material or manufacture
(w/o VAT:133.48 €)
CampBoss Rear Tyre Bag
- Fits most rear tyre sizes
- keeps vehicle interior clean
- exceptional durability
Features
- The main bag is made from 1000D Cordura, which is a very heavy weight fabric with exceptional strength, abrasion resistance and durability.
- Features a main compartment , 2 front YKK zip pockets and 2 side Velcro pockets
- The main compartment is lined with water resistant 210D nylon with a drawstring opening at the top, plus a removable internal pocket made from 548gsm tarpaulin PVC.
- Each pocket has an eyelet for drainage
- 5cm wide rear nylon webbing strap can be adjusted to suit virtually any tyre
(w/o VAT:145.72 €)
CampBoss Nudie Boss Shower Tent
CampBoss Nudie Boss Shower Tent
- CONTENTS
- 1 x top cover
- 1 x dual-colour LED strip (switch control), 1 USB cable, 2m long
- 2 x 304 stainless steel T-brackets (black)
- 2 x 304 stainless steel clips
- 8 each x 304 stainless steel M8 nuts, bolts & washers
- 4 x pegs
- 2 x wrenches
(w/o VAT:447.39 €)
CampBoss Rechargeable Shower Kit
CampBoss Rechargeable Shower Kit
The CampBoss rechargeable shower kit is completely cordless thanks to a 2,200mAh Li-ion battery pack, meaning you can set up your camp shower wherever you like!
By using the included shower head hook or shower head suction adaptor, your CampBoss shower will stand at 2.2 metres tall while the serviceable pump produces a flow of 2.5 litres per minute.
The Li-ion battery supply can be recharged using any 5V USB port output, and the entire kit packs neatly inito the included waterproof travel bag.
Features:
-
-
- Shower Parts
- shower head
- pump filter cover
- protective collar
- battery power supply
- USB recharging cable
- hanging hook
- suction cup
- shower head holder
Specifications
Voltage……………….3.7V
Max.current…………2.5A
Water flow…………..2.5 litres per minute
Battery capacity…..2,200mAh
Run time…………….45-60minutes
Hose length………..2.2 metres
Power supply………rechargeable lithium-ion battery
Charging…………….any USB port: 5V 0.5-2A
Charging time……..2-5 hours (depending on USB output)
- Shower Parts
-
(w/o VAT:88.54 €)
Snake4x4 Quick Fist 31-40mm
(w/o VAT:15.73 €)
Explore4x4 Outdoor Chair
A solidly made tourist chair. Comfortable and easily foldable, the set includes a cover, weight 5 kg. Color: graphite or green.
(w/o VAT:90.97 €)
(w/o VAT:214.39 €)
