MorE4x4 Steel rear bumper Toyota Hilux Revo 2016->; Rocco/Invincible 2020->, all engine

MorE4x4 Steel rear bumper Toyota Hilux Revo 2016->; Rocco/Invincible 2020->, all engine 

The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.

The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces. 

The bumper has two built-in fixtures for work lamps and reinforced fixings for shackle handles.

MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.