More4x4 steel engine skid plate for Suzuki Grand Vitara II (2005-2014)
Application: all engine versions
The skid plate is made of 4 mm steel. With the cover there is a set of mounting screws provided using the factory holes and threads in the vehicle frame. The steel covers are painted with two layers of black powder paint.
The cover is intended for the factory bumper.
The More4x4 chassis covers are dedicated to specific models of off-road vehicles and are an ideal protection of the vehicle against mechanical damage to the chassis. When designing them, off-road use and work in difficult conditions are taken into account. Thanks to our many years of experience, we are able to offer professional solutions for hard work.
The engine cover is part of a kit but can be used without the need to install other covers.
(w/o VAT:323.7 €)
More4x4 aluminium engine skid plate for Suzuki Grand Vitara II (2005-2014)- extended
Application: all engine versions
The skid plate is made of 6 mm aluminium. With the cover there is a set of mounting screws provided using the factory holes and threads in the vehicle frame. The steel covers are painted with two layers of black powder paint.
The cover is intended for the factory bumper.
The More4x4 chassis covers are dedicated to specific models of off-road vehicles and are an ideal protection of the vehicle against mechanical damage to the chassis. When designing them, off-road use and work in difficult conditions are taken into account. Thanks to our many years of experience, we are able to offer professional solutions for hard work.
The engine cover is part of a kit but can be used without the need to install other covers.
(w/o VAT:337.27 €)
The kit consists of two elements:
- Motor cover (OPA030)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:729.04 €)
The kit consists of two elements:
- Motor cover (OPA063)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:729.04 €)
The kit consists of two elements:
- Motor cover (OPA094)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:744.62 €)
(w/o VAT:219.08 €)
(w/o VAT:221.47 €)