(w/o VAT:266.08 €)
(w/o VAT:296.33 €)
The Panhard rod is a transverse reaction bar, transfers the lateral forces from the vehicle wheels by holding the axle in a specific position relaitve to the frame or bodywork. Most often used in the rear axle suspension.
Panhrad adjustable rods are used as a replacement for the original reaction rods when lifting the suspension to the lift + 2 inch or + 4 inch.
By cutting the original panhard rod and welding the purchased part to it, you get an adjustable panhard rod. After installation, it can be adjusted in one direction using a fork wrench in the space provided on the rod and then fixed in place using a nut on the adjustable side. For 100% security, the use of threadlocking glue is recommended!
the same spacers as the original can be used
Cutting and welding of the panhard rod should be done by a professional if possible!
The price includes one panhard rod without silents!
Price includes 2 pieces of arms without silentblocks
A szett 2db lengőkart tartalmaz szilentek nélkül!
With the installation of this part, the axle moves forward by 2.5 cm, preventing the larger wheel from interfering with the rear fender arch.
The Panhard rod is a transverse reaction bar, transfers the lateral forces from the vehicle wheels by holding the axle in a specific position relaitve to the frame or bodywork. Most often used in the rear axle suspension.
Panhrad adjustable rods are used as a replacement for the original reaction rods when lifting the suspension to the lift + 2 inch or + 4 inch.