Tree saver 3 m / 12 t
Tree trunk protector 3 m length, 75 mm width 12 t minmum breaking strength.
(w/o VAT:46.91 €)
MORE4x4 folding license plate holder for hawse fairlead
The distance between the mounting holes is 254 mm.
(w/o VAT:54.54 €)
Kinetic pulling strap with a length of 9 metres and a load capacity of 12 tonnes.
Elongation up to +20%
(w/o VAT:101.9 €)
Snake4x4 snatch block 4,5T
Pulley with 4500 kg load capacity for synthetic and wire ropes
(w/o VAT:59.33 €)
Snake4x4 Self Rescue Kit - Large
Contents of the set:
- Kinetic strap 3m x 75mm 12 tons;
- Kinetic strap 9m x 60mm 8 tons;
- Kinetic strap 20m x 50mm 12 tons;
- 1 pair of leather gloves;
- Sekli 2 pieces 4.75 tons;
-
snatch block;
- Protective bag
(w/o VAT:258.21 €)
Small accessory kit
Contents:
1. Kinetic belt 9m x 75mm 11 tons;
2. Leather gloves;
3. 2 Sekli 4.75 tons;
4. protective bag
(w/o VAT:146.09 €)
(w/o VAT:18.63 €)
(w/o VAT:2.18 €)
Snake4x4 Rubber cover for 4.75 T shallow
Prevents shallow rattling, knocking and protects the bumper paint while driving.
Color: red
(w/o VAT:3.14 €)
MORE4x4 battery isolation switch mounting plate
MORE4x4 battery isolation switch mounting plate
Black powder-coated plate that facilitates the placement of the disconnect switch in the engine compartment.
(w/o VAT:11.8 €)
(w/o VAT:349.29 €)
Snake4x4 Anchor 5500Kg
Snake4x4 Anchor 5500Kg
Includable winch anchor with storage bag
Load capacity 5500 kg
(w/o VAT:280.43 €)
Pulley with 8000 kg load capacity for synthetic and wire ropes.
(w/o VAT:44.41 €)
Snake4x4 snatch block 3,5 t
Pulley with 3500 kg load capacity for synthetic and wire ropes.
(w/o VAT:34.53 €)
Kinetic pulling rope with a length of 9 metres, diameter of 32mm and a load capacity of 24 tonnes.
Elongation up to +30%
(w/o VAT:148.81 €)
Snake4x4 rope heart
Snake4x4 rope heart
Ropes, steel rods, exempts the rope from injuries. With a rope heart, the loop will be more burdened and resistant. Because rope loops are almost always connected to a metal component, it is always used with a rare exception.
For synthetic rope 12mm in diameter
(w/o VAT:1.45 €)
Snake4x4 license plate holder
Material: steel;
Color: powder-coated matte black;
The perfect solution for cars where there is a problem with mounting the license plate on the bumper.
If you need to use the bumper socket, simply remove the license plate with the bracket
(w/o VAT:44.59 €)
Snake4x4 license plate holder
Made of stainless steel
(w/o VAT:44.53 €)
