Recommended: Ford Ranger Raptor 23+ 2.0L diesel engines
The belly armor is made of 6 mm thick aluminum and is coated with 2 layers of black powder paint. The package includes the necessary screws to attach the skid plate to the factory holes and threads.
More4x4 skid plates are designed for specific models of off-road vehicles, providing ideal protection against mechanical damage to the vehicle chassis. Based on years of experience, the design takes into account off-road use and work in tough conditions.
The transmission protective skid plate is part of a kit but can also be installed independently
(w/o VAT:290.58 €)
The set consists of four elements:
Radiator and steering gearbox cover (OPA090)
Engine and axle cover (OPA091)
Gearbox cover (OPA107)
Transfer case cover (OPA108)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:1 125.54 €)
The kit consists of two elements:
- Motor cover (OPA089)
- Transmission and transfer case cover (OPA095)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:904.76 €)
Setul constă din două elemente:
- Motor cover (OPA089)
- Transmission and transfer case cover (OPA096)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:904.76 €)
The kit consists of two elements:
- Motor cover (OPA097)
- Transmission and transfer case cover (OPA095)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:926.39 €)
The kit consists of two elements:
- Motor cover (OPA097)
- Transmission and transfer case cover (OPA096)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:926.39 €)
The kit consists of three elements:
- Engine cover (OPA017)
- Transmission cover (OPA018)
- Transfer case cover (OPA019)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:893.16 €)
The kit consists of two elements:
- Motor cover (OPA030)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:730.81 €)
The kit consists of three elements:
- Engine cover (OPA077)
- Transmission cover (OPA078)
- Transfer case cover (OPA079)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:945.79 €)
The kit consists of three elements:
- Engine cover (OPA099)
- Transmission cover (OPA078)
- Transfer case cover (OPA079)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:945.79 €)
The kit consists of two elements:
- Motor cover (OPA063)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:730.81 €)
The kit consists of two elements:
- Motor cover (OPA094)
- Transfer case cover (OPA031)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:746.42 €)
The kit consists of three elements:
- Engine cover (OPA067)
- Transmission cover (OPA068)
- Transfer case cover (OPA069)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:998.65 €)
The kit consists of two elements:
- Engine cover (OPA053)
- Transmission and transfer case cover (OPA028)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:691.78 €)
Recommended for Jeep Wrangler JL, 2018+, 2.0L, 2.2L engines
The kit consists of three elements:
- Engine cover (OPA086)
- Transmission cover (OPA087)
- Transfer case cover (OPA088)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:1 078.71 €)
The kit consists of three elements:
- Engine cover (OPA076)
- Transmission cover (OPA033)
- Transfer case cover (OPA035)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:883.35 €)
The kit consists of two elements:
- Engine cover (OPA106)
- Transmission and transfer case cover (OPA072)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:779.65 €)
The kit consists of two elements:
- Engine cover (OPA071)
- Transmission cover (OPA072)
- Transfer case cover (OPA073)
The chassis cover set is made of PA11 aluminum, 6 mm thick.
The covers come with an installation screw set, and the installation is done using the factory holes and threads on the vehicle's chassis.
(w/o VAT:779.65 €)
(w/o VAT:162.24 €)
(w/o VAT:162.24 €)