Snake4x4 front steel bumper with winch plate Jeep Wrangler JK (2007-2018)
JUBILEE VERSION FOR THE 10TH ANNIVERSARY OF THE PRESENTATION OF THE RUBICON MODEL (WITH TUBING)
High quality laser cut black powder coated steel bumper
Factory headlights can be installed
The corners of the bumper can be removed
Assembly instructions included.
51 kg without packaging
(w/o VAT:1 212.97 €)
without LED
(w/o VAT:2 624.83 €)
(w/o VAT:2 905.44 €)
without LED
(w/o VAT:2 499.8 €)
with lightbar and with front skid plate
without LED
(w/o VAT:2 151.48 €)
without LED
(w/o VAT:2 624.83 €)
(w/o VAT:2 905.44 €)
without LED
(w/o VAT:2 624.83 €)
MorE4x4 Steel front bumper with winch plate Nissan Navara D23 /NP300 after 2014, all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 238.76 €)
(w/o VAT:2 905.44 €)
MorE4x4 Front steel bumper for Nissan Navara D40 / Pathfinder R51 (2005-2014)
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 238.76 €)
MorE4x4 Steel front bumper with winch plate Suzuki Jimny 2018->
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
As part of the assembly system, MorE4x4 front bumpers have side supports resting on the frame and the bumper corner. Such a solution, also used in rear bumpers with elongated side elements, makes the structure stiff and enables precise adjustment of the bumper in relation to the car body. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
MorE4x4 steel front bumper is made of 6, 4 and 3 mm thick steel. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 080.62 €)
(w/o VAT:2 905.44 €)
without LED
(w/o VAT:2 624.83 €)
(w/o VAT:2 905.44 €)
without LED
(w/o VAT:2 624.83 €)
MorE4x4 Steel front bumper with winch plate Toyota Hilux Vigo 2005-2011 (version before lift), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 238.76 €)
MorE4x4 Steel front bumper with winch plate Toyota Hilux Vigo 2011-2015 (after lift), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 333.64 €)
MorE4x4 Steel front bumper with winch plate Toyota Land Cruiser J120 2002-2009, all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 238.76 €)
(w/o VAT:2 905.44 €)