(w/o VAT:227.13 €)
MorE4x4 Lift kit 2" Nissan Navara D40 05-14
MorE4x4 Lift kit 2" Nissan Navara D40 (2005-2014)
Application: for all engine variants (2005-2014)
Allows a 5 cm lift of the suspension.
Does not change the characteristics of the vehicle's shock absorbers and springs, but significantly increases ground clearance and off-road capabilities.
The kit includes:
- 2 pcs. front strut tops lift pads
- 4 pcs u-bolts for the rear axle
- 2 pcs. spacers between the rear axle and the leaf spring
- necessary fasteners bolts, nuts, washers
Thanks to the MorE 4x4 chassis lift kit, the ground clearance of your car is increased, allowing you to mount slightly larger wheels, and also significantly improves the off-road capabilities of your car.
(w/o VAT:268.93 €)
(w/o VAT:130.01 €)
(w/o VAT:91.56 €)
(w/o VAT:166.46 €)
(w/o VAT:144.9 €)
(w/o VAT:227.13 €)
MorE4x4 Lift kit 2" Toyota Hilux Revo (2015+)
MorE4x4 Lift kit 2" Toyota Hilux Revo (2015+)
Application: for all engine variants (2015+)
Allows a 5 cm lift of the suspension.
Does not change the characteristics of the vehicle's shock absorbers and springs, but significantly increases ground clearance and off-road capabilities.
The kit includes:
- 2 pcs. front strut tops lift pads
- 4 pcs u-bolts for the rear axle
- 2 pcs. spacers between the rear axle and the leaf spring
- necessary fasteners bolts, nuts, washers
Thanks to the MorE 4x4 chassis lift kit, the ground clearance of your car is increased, allowing you to mount slightly larger wheels, and also significantly improves the off-road capabilities of your car.
(w/o VAT:283.3 €)
(w/o VAT:132.68 €)
(w/o VAT:158.9 €)
(w/o VAT:162.23 €)
MorE4x4 Lift kit 2" Ford Ranger T7 (2015+)
MorE4x4 Lift kit 2" Ford Ranger T7 (2015+)
Application: for all engine variants (2015+)
Allows a 5 cm lift of the suspension.
Does not change the characteristics of the vehicle's shock absorbers and springs, but significantly increases ground clearance and off-road capabilities.
The kit includes:
- 2 pcs. front strut tops lift pads
- 4 pcs u-bolts for the rear axle
- 2 pcs. spacers between the rear axle and the leaf spring
- necessary fasteners bolts, nuts, washers
Thanks to the MorE 4x4 chassis lift kit, the ground clearance of your car is increased, allowing you to mount slightly larger wheels, and also significantly improves the off-road capabilities of your car.
(w/o VAT:283.3 €)
Improve your vehicle with RC
Level your F-150 with Rough Country's head-turning aluminum leveling spacer. This easy to install, innovative aluminum spacer combines great looks and strength, while providing 2" of lift. This spacer features aircraft quality, T6061 billet aluminum offering enhanced durability against elements like rain and rust. Rough Country's spacer design has a driver and passenger side pattern that allows for clearance between the upper control arm and the strut. This simple design is easy to install with a 100% bolt-on installation process that can be done in mere hours. Best of all, this simple kit levels the front of your truck with the rear, giving your vehicle an overall more aggressive appearance and plenty of room for up to 35" tires.
Top quality shock absorbers
Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
Specs:
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- No need to disassemble your struts to install
In the box:
- Front strut spacers
- Rear 1" lift blocks
- Rear u-bolts
- (2) Rear N3 Premium shocks
- Hardware
(w/o VAT:600.04 €)
Modify your vehicle with Rough Country
Gain additional ride height and aggressive good looks with Rough Country’s 3" lift kit. This all-inclusive kit features everything you need to transform your truck into a capable off-road machine with head-turning appeal. Featuring a set of durable control arms, HD lifted coil springs, and rear fabricated anti-wrap blocks, this 3" kit is loaded with great upgrades to get the most out of your Dodge. In terms of ride quality this means the best of both worlds for a daily driver that’s not afraid to get down and dirty. Best of all, this kit is easy to install. With a 100% bolt-on design, this kit can be installed in any home garage with common tools in a fraction of the time of more complicated kits.
Top quality shock absorbers
Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
In the box:
- Front lifted coil springs
- Front upper control arms
- Front lower control arms
- Front track bar bracket
- Front sway bar brackets
- Front brake proportioning valve bracket
- Rear fabricated lift blocks 5,75"
- Rear u-bolts
- (4) Premium N3 Series shocks
- Hardware
Notes:
- Requires drilling
- Does NOT fit V8 GAS engine models
- Does NOT fit Dually models
(w/o VAT:1 523.84 €)
The best solution for high lifts
Rough Country suspension kit offers easy installation and aggressive good looks. This kit features a set of high-quality, forged aluminum upper control arms designed to make alignment adjustments easier and Clevite rubber bushings for enhanced durability. The product includes N3 Lifted Struts and N3 Nitrogen-charged shocks, giving your truck incredible ride-quality both on and off-road. Once installed, this kit gives your truck plenty of ride height for up to 34in tires while offering a clean, level look from front to rear.
Easy installation in your own garage
This all-inclusive kit comes with everything you need, and installation is a piece of cake compared to other kits on the market! Featuring a 100% bolt-on installation process that requires zero cutting or drilling, this kit can be installed using common tools in a home garage, and allows the truck to be returned to stock at any time if so desired. Best of all this kit features Rough Country’s Lifetime Replacement Warranty.
Specs:
- Easy installation
- No Cutting or Drilling required!
- Increased ground clearance
- Levels the front and rear of the truck
Specs of shock absorbers front:
- Maintains smooth, factory-like ride
- Increased ground clearance
- Nitrogen-charged
- Engineered for lifted applications
- Infinitely Variable Damping
- Leak-proof piston seal
- Massive 1 3/8" Bore
- Silver powder coat finish
In the box:
- (2) Forged upper control arms front
- (2) Shock absorbers front
- (2) Lift blocks rear
- (4) U-bolts rear
- (2) Shock absorbers rear
- Hardware
Notes:
- Does not fit regular/standard cab models
- This kit does not work on models with stock ride height over 22" [measured from center of wheel to the bottom of the fender]
- Trucks with FX4, Snow Prep, and other off-road packages that modify front strut assemblies will likely measure over 22in and will not work with this kit
- 2014 model trucks measuring over 22in should consider our 4in Lift Kit RCK57430
- 2015+ model trucks measuring over 22in should consider our 4in Lift Kit RCK55530
- Recommended Factory Wheel Backspacing and ET+12
(w/o VAT:2 652.84 €)
Prepare your vehicle for offroad adventure
Rough Country's 2,5-3" leveling suspension kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33" tire. This kit now includes two sets of 0.25" spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8" of lift. Use both for a full 3" level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze.
Specs:
- Easy bolt-on installation
- Increased ground clearance
- Maintains factory ride quality
- Levels the front with the rear of the vehicle
- Differential spacers maintain proper front CV axle angle
- Strut spacer kit requires no strut disassembly or strut compressor for installation
- Strut spacer kit features adjustable shim plates that allow you to fine tune the front amount of lift
In the box:
- Front upper strut extensions
- Front differential mounting spacers
- Front skid plate spacers
- Front bump stops
- Rear 1,5" lift blocks
- Rear u-bolts
- Hardware
Notes:
- Does NOT fit Pro Series models
- Does NOT fit XSP-X models
- Recommended factory wheel backspacing
- Recommended tyre size 305/65 R18
Durable kit from RC
Give your Ford Super Duty an impressive upgrade, front to back with Rough Country’s 3" suspension lift kit! This easy-to-install lift kit raises the front of your vehicle to be equal height with the rear for a leveled, better-than-stock look that gives an improved ride height and more aggressive appearance. This kit features a set of front, lifted coil spacers allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm drop brackets as well as a track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Get the wheels you want! Rough Country's kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing.
Top quality shock absorbers
Improve your on and off-road ride quality with Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
Specs:
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
N3 shocks specs:
- 10-stage variable valving
- High pressure nitrogen charged
- 35mm Piston
- Chromed Hardened 18mm piston rod
- 54mm shock body to dissipate heat faster
- 36kN Tensile Strength
- Spring loaded piston rod seal
- Military spec. fluid rated to –40° C
- Rubber bushings for better absorption
- Metallic silver paint
In the box:
- Front coil spring spacers
- Front radius arm drop brackets
- Front track bar drop bracket
- Rear lift blocks 2"
- Rear u-bolts
- (4) Premium N3 Series shocks
- Hardware
Notes:
- Does NOT fit dually models
- Fits 4WD models ONLY
(w/o VAT:985.82 €)
Upgrade your vehicle with Rough Country
Give your Jeep a more aggressive look with Rough Country’s easy-to-install 2,5" suspension lift. This all-inclusive kit comes with everything you need to run up to 35" tyres. Featuring 2,5" front and 2" rear coil spacers, this kit gives your Jeep a great boost for additional ride height and an eye-catching level look from front to rear. This kit is engineered with a spring retention design, ensuring that your coils always stay in place even during extreme articulation, while the rear track bar bracket keeps the rear axle perfectly centered. This easy-to-install kit features a 100% bolt-on installation process that’s easy enough to do in a home garage! Enjoy the lifted life with Rough Country’s 2,5" suspension lift kit!
Specs:
- Clears up to 35" tyres
- Easy installation
- Maintains factory ride quality
- Spring retention design keeps the coil springs in place during extreme articulation
- Rear track bar bracket keeps the rear axle perfectly centered
In the box:
- Rear track bar relocation bracket
- Rear extended sway bar links
- Front and rear coil spring spacers
- Front and rear shocks relocation brackets
- Front and rear brake lines relocation brackets
- Hardware
Notes:
- 35" tires will clear but rubbing may occur with extreme articulation
- If planning on running 35" tyres on factory wheels, double check clearance between the front tire, lower control arm and sway-bar links
- 2012-2018 models require exhaust modifications to clear the front driveshaft RC1030 (sold separately)
(w/o VAT:557.11 €)
Durable suspension kit from Rough Country
Transform your Jeep and run larger wheels and tires with Rough Country’s popular 2,5” suspension lift! This easy-to-install suspension lift features everything you need to gain increased ground clearance and a killer new look. This kit features a set of lifted front and rear coil springs to offer a taller profile and fantastic off-road ability. These coil springs are factory-tuned to the OE spring rate to offer a factory-like ride quality.Specs:
- Easy bolt-on installation
- Increased ground clearance
- Factory tuned coil springs are based on the stock spring rate
- Allows the use of the factory equipped shock absorbers
In the box:
- Front and rear coil springs
- Front and rear shock relocation brackets
- Front and rear brake line relocation brackets
- Hardware
Notes:
- 2012-2018 models require exhaust modifications to clear the front driveshaft RC1030 (sold separately)
(w/o VAT:951.31 €)
Levels the vehicle with RC kit
With Rough Country’s 2" suspension lift kit you can give your Jeep Wrangler the aggressive edge your ride deserves. This kit features easy, bolt-on installation and levels the front with the rear of the vehicle. You’ll be able to maintain your smooth factory ride quality and also increase your ground clearance.
Specs:
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
In the box:
- Front coil spring spacers
- Rear coil spring spacers
- Shock relocation brackets
Notes:
- Shocks sold separately
- The use of stock wheels with larger than stock tires may cause the tire to come in contact with the lower control arm at full turn
- Aftermarket wheels are recommended
(w/o VAT:349.97 €)