with lightbar and with front skid plate
without LED
(w/o VAT:2 259.82 €)
2007-2018; 2017->
with lightbar and with front skid plate
(w/o VAT:2 697.47 €)
with lightbar and with front skid plate
without LED
(w/o VAT:2 405.63 €)
MorE4x4 Steel front bumper with winch plateeep Wrangler JL (2018+), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 013.97 €)
MorE4x4 Steel short front bumper with winch plateeep Wrangler JL (2018+), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:803.06 €)
- Stubby design offers plenty of clearance for better approach angles
- LED cubes are IP67 Waterproof rated
- Built-in winch plate
- Includes D-ring set - 4,75 ton capacity
- Laser-cut "RC" logo
- Satin black finish
Fits To: Gladiator JT 20->;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JK 2 Door 07-18;Wrangler JK 4 Door 07-18;Wrangler JL 4XE 21->
(w/o VAT:1 907.19 €)
- High and tight design for maximum clearance
- Made from steel
- 1,5"x120" wall structural tubing with 1/8" and 3/16" laser cut cold-rolled sheet metal
- Removable overrider with front camera provision
- Winch compatible up to 12000 lbs / 5,4 t
- D-ring recovery and jack points
- Removable sheet metal for customization
Fits To: Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JK 2 Door 07-18;Wrangler JK 4 Door 07-18;Gladiator JT 20->;Wrangler JL 4XE 21->
(w/o VAT:1 468.87 €)
- Stubby design offers plenty of clearance for better approach angles
- LED cubes are IP67 Waterproof rated
- Built-in winch plate
- D-ring set - 4,75 ton capacity
- Laser-cut "RC" logo
- Color: black
Fits To: Gladiator JT 20->;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JK 2 Door 07-18;Wrangler JK 4 Door 07-18;Wrangler JL 4XE 21->
(w/o VAT:2 347.03 €)
- Steel bumper
- Powder coated
- Black finish
- Solid construction
- Protects the front of the vehicle from damage
Fits To: Gladiator JT 20->;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JL 4XE 21->
(w/o VAT:4 545.57 €)
- _x000D_
- Pre-drilled slots for parking sensors _x000D_
- Sensor adapters for the proper mounting of parking sensors are in the box _x000D_
- Made from steel _x000D_
- Solid construction _x000D_
- Satin black finish _x000D_
- Powder-coat finish _x000D_
- Protects vehicle from on and off-road debris _x000D_
- Modular construction _x000D_
- Compatible with factory fog lights _x000D_
Fits To: Gladiator JT 20->;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JL 4XE 21->
(w/o VAT:1 710.87 €)
- _x000D_
- Dedicated bumper for Jeep JL and Jeep Gladiator _x000D_
- Made from 3 mm steel _x000D_
- Winch plate fits in most available winches (winch sold separately) _x000D_
- Modular construction _x000D_
- Protects vehicle from on & off-road debris _x000D_
- Aggressive look _x000D_
- Mounting point for license plate _x000D_
- Mounting points for park sensors (fits EU vehicles) _x000D_
- Adapters to fit factory parking sensors _x000D_
- Mounting points for factory fog lights _x000D_
- Modern, red painted hooks _x000D_
- Weight with plate: 48 kg _x000D_
- 24-month warranty _x000D_
Fits To: Gladiator JT 20->;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JL 4XE 21->
(w/o VAT:1 871.69 €)
- _x000D_
- Stubby design provides lots of clearance for better approach angles _x000D_
- Includes 2x 2" flush mount LED cubes - 2880 lumens _x000D_
- LED Cubes feature a chrome-plated panel design _x000D_
- LED Cubes are IP67 water resistant _x000D_
- Winch plate built in _x000D_
- Includes a set of D-rings - 4.75 ton capacity _x000D_
- RC" logo laser engraving _x000D_
- Finished in satin black _x000D_
Fits To: Gladiator JT 20->;Wrangler JL 4XE 21->;Wrangler JK 2 Door 07-18;Wrangler JK 4 Door 07-18;Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->