Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter.

• Each clamp supports a safe working load of 25lbs (11 kilos).

• 2 clamps support 50 lbs (23 kilos).

• Mounts easily with one #10 bolt.

• Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• Holds objects from 5/8" to 1 3/8” (16 to 32mm) in diameter.

• Each clamp supports a safe working load of 25lbs (11 kilos).

• 2 clamps support 50 lbs (23 kilos).

• Mounts easily with one #10 bolt.

• Mounting area: 1 1/2" x 1 5/6" (38 x 47mm)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• 70-83 mm diameter
• 23 kg load capacity
• 1 pc/package

The description was translated by artificial intelligence

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

• Holds objects from 2.5" to 9.5" (64 to 240mm) in diameter.

• Each clamp supports a safe working load of 50lbs (23 kilos).

• 2 clamps support 100lbs (45 kilos).

• Mounts with three #10 bolts or screws.

• Mounting area: 6" x 7/8" (152 x 22mm).

QUICK FIST XL CLAMP

• Two 14’’ (356mm) separate straps hold round objects up to 15” (381mm) in diameter.

• Holds equipment measuring up to 28” (711mm) in linear distance.

• Each clamp supports a safe working load of 150lbs. (68 kilos) with a break-strength of 300lbs. (176 kilos).

• Two clamps support 300lbs with a break-strength of 600lbs (272 kilos).

• Each half of the clamp mounts with four #10 screws or bolts.

• Mounting Area: 2” x 2” (51mm x 51mm)

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

•  13-114 mm diameter (1/2"-4,5")
• 1 pc/23 kg load capacity
• 2 pcs/55 kg load capacity
• 2 pcs/package

Two good ways to install QUICK FIST clamps are with Jacknuts® or rivetnuts.

Jacknut® Threaded inserts
Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)
These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Quick Fist Belt Mount

• 4 pc mountain post
• 1 pc connector
• 2 pc tie down 38" (965x38x6mm)
• 4 pc hooks

Jacknut® Threaded inserts

Jacknuts are a fast and inexpensive way to put a nut into a place where there is no access for a traditional nut. After drilling a hole, the Jacknut is inserted and then tightened with the proper sized bolt. The “legs” of the Jacknut collapse to grip the inside of the mounting surface, leaving a permanent, reusable nut in the hole.

Rivetnuts (best known brand is Nutserts®)

These are nuts that can be riveted into drilled holes. Like Jacknuts these are particularly good to install where the underside of a mounting hole cannot be accessed. To install rivetnuts, you will need a special type of rivet gun or find a garage that will install them for you.

Quick Fist Mounting Kit

A szett tartalma: 

• 2 db Quick Fist Mini
• 4 db Quick Fist Original
• 2 db Quick Fist Super