96
Product
- High-pressure nitrogen-gas filled monotube design
- Extra-large 46mm bore
- 180º directional mounting is perfect for custom set ups
- Low operation temperature
- Internal bump stops
- No fade or lag makes for consistent performance
- Perfect for lifted vehicles
- High quality product
Car brand:
Jeep
Where to install:
elöl
Out of stock
316.56 €
(w/o VAT:249.26 €)
(w/o VAT:249.26 €)
- 10-Stage variable valving
- High pressure nitrogen charged
- 35mm piston
- Chromed hardened 18mm piston rod
- 54mm Shock body to dissipate heat faster
- 36kN Tensile strength
- Spring loaded piston rod seal
- Military spec. fluid rated To –40° C
- Rubber bushings for better absorption
- Metallic silver paint
Car brand:
Jeep
Where to install:
hátul
Out of stock
326.16 €
(w/o VAT:256.82 €)
(w/o VAT:256.82 €)
- High-pressure nitrogen-gas filled monotube design
- Extra-large 46mm bore
- 180º directional mounting is perfect for custom set ups
- Low operation temperature
- Internal bump stops
- No fade or lag makes for consistent performance
- Perfect for lifted vehicles
- High quality product
Car brand:
Jeep
Where to install:
hátul
Out of stock
316.56 €
(w/o VAT:249.26 €)
(w/o VAT:249.26 €)
- High-pressure nitrogen-gas filled monotube design
- Extra-large 46mm bore
- 180º directional mounting is perfect for custom set ups
- Low operation temperature
- Internal bump stops
- No fade or lag makes for consistent performance
- Perfect for lifted vehicles
- High quality product
Car brand:
Jeep
Where to install:
elöl
Out of stock
316.56 €
(w/o VAT:249.26 €)
(w/o VAT:249.26 €)
- High-pressure nitrogen-gas filled monotube design
- Extra-large 46mm bore
- 180º directional mounting is perfect for custom set ups
- Low operation temperature
- Internal bump stops
- No fade or lag makes for consistent performance
- Perfect for lifted vehicles
- High quality product
Car brand:
Jeep
Where to install:
elöl
Out of stock
316.56 €
(w/o VAT:249.26 €)
(w/o VAT:249.26 €)
- High-pressure nitrogen-gas filled monotube design
- Extra-large 46mm bore
- 180º directional mounting is perfect for custom set ups
- Low operation temperature
- Internal bump stops
- No fade or lag makes for consistent performance
- Perfect for lifted vehicles
- High quality product
Car brand:
Jeep
Where to install:
elöl
Out of stock
316.56 €
(w/o VAT:249.26 €)
(w/o VAT:249.26 €)
- Advanced foam-cell technology
- Vehicle specific multi-stage valving
- Increased fluid capacity for max heat dissipation
- 180° directional mounting
- Construction ensures solid contact between tire and road
- Twin tube construction
- Chrome plated shaft
- Sintered iron piston
- Black boot included
Car brand:
Jeep
Where to install:
elöl
Out of stock
200.8 €
(w/o VAT:158.11 €)
(w/o VAT:158.11 €)
- Advanced foam-cell technology
- Vehicle specific multi-stage valving
- Increased fluid capacity for max heat dissipation
- 180° directional mounting
- Construction ensures solid contact between tire and road
- Twin tube construction
- Chrome plated shaft
- Sintered iron piston
- Black boot included
Car brand:
Jeep
Where to install:
hátul
Out of stock
200.8 €
(w/o VAT:158.11 €)
(w/o VAT:158.11 €)
- Advanced foam-cell technology
- Vehicle specific multi-stage valving
- Increased fluid capacity for max heat dissipation
- 180° directional mounting
- Construction ensures solid contact between tire and road
- Twin tube construction
- Chrome plated shaft
- Sintered iron piston
- Black boot included
Car brand:
Jeep
Where to install:
elöl
Out of stock
200.8 €
(w/o VAT:158.11 €)
(w/o VAT:158.11 €)
- Advanced foam-cell technology
- Vehicle specific multi-stage valving
- Increased fluid capacity for max heat dissipation
- 180° directional mounting
- Construction ensures solid contact between tire and road
- Twin tube construction
- Chrome plated shaft
- Sintered iron piston
- Black boot included
Car brand:
Jeep
Where to install:
hátul
Out of stock
200.8 €
(w/o VAT:158.11 €)
(w/o VAT:158.11 €)
- Advanced foam-cell technology
- Vehicle specific multi-stage valving
- Increased fluid capacity for max heat dissipation
- 180° directional mounting
- Construction ensures solid contact between tire and road
- Twin tube construction
- Chrome plated shaft
- Sintered iron piston
- Black boot included
Car brand:
Jeep
Where to install:
elöl
Out of stock
200.8 €
(w/o VAT:158.11 €)
(w/o VAT:158.11 €)
- Lift Height: 2,5-3"
- Robust and rugged twin-tube design is geared toward hardcore off-road abuse
- Twin-tube design provides longer stroke trave
- Premium quality rubber bushings
Car brand:
Jeep
Where to install:
elöl
Out of stock
266.63 €
(w/o VAT:209.95 €)
(w/o VAT:209.95 €)
- Vehicle-specific shock absorbers
- Race-inspired performance for increased vehicle stability
- Improved dynamic roll control and low-speed damping
- Dramatic improvement in on-road comfort and off-road performance
- Optimized fitment for unobstructed suspension travel and articulation
- 2.3” shock body provides optimal performance
- 6061-T6 aluminum alloy shock body resists Impact to protect internal components
- Smooth honed internal shock body surface for long-term performance
- 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
- Large shaft diameter provides a wide range of adjustment on adjustable shocks
- Hard anodized 6061-T6 aluminum alloy billet piston
- 1-piece Teflon bronze piston wear band w/ O-ring
- VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
- VOD reduces shock bottoming at full compression or over uneven terrain
- OGS (Oil/Gas Separator) prevents cavitation
- High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
- Synthetic formula also contains special anti-wear and lubricity agents
- 1,000-hour salt spray corrosion resistance test on all hardware
- Designed, engineered, and assembled in-house from domestic and globally sourced components
- Patented design
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
2 630.65 €
(w/o VAT:2 071.38 €)
(w/o VAT:2 071.38 €)
- Vehicle-specific shock absorbers
- Race-inspired performance for increased vehicle stability
- Improved dynamic roll control and low-speed damping
- Dramatic improvement in on-road comfort and offroad performance
- Optimized fitment for unobstructed suspension travel and articulation
- 2.3” shock body provides optimal performance
- 6061-T6 aluminum alloy shock body resists Impact to protect internal components
- Smooth honed internal shock body surface for long-term performance
- 3/4” induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
- Large shaft diameter provides a wide range of adjustment on adjustable shocks
- Hard anodized 6061-T6 aluminum alloy billet piston
- 1-piece Teflon bronze piston wear band w/ O-ring
- VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
- VOD reduces shock bottoming at full compression or over uneven terrain
- OGS (Oil/Gas Separator) prevents cavitation
- High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
- Synthetic formula also contains special anti-wear and lubricity agents
- 1,000-hour salt spray corrosion resistance test on all hardware
- Designed, engineered, and assembled in-house from domestic and globally sourced components
- Patented design
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
3 224.3 €
(w/o VAT:2 538.82 €)
(w/o VAT:2 538.82 €)
_x000D_
- _x000D_
- Provide increased stability and better ride quality _x000D_
- Adapted for everyday driving and rough terrain _x000D_
- Engineered in the image of motorsport beasts _x000D_
- Add a sporty, aggressive look _x000D_
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
3 224.3 €
(w/o VAT:2 538.82 €)
(w/o VAT:2 538.82 €)
_x000D_
- _x000D_
- Provide increased stability and better ride quality _x000D_
- Adapted for everyday driving and rough terrain _x000D_
- Engineered in the image of motorsport beasts _x000D_
- Add a sporty, aggressive look _x000D_
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
4 276.79 €
(w/o VAT:3 367.55 €)
(w/o VAT:3 367.55 €)
_x000D_
- _x000D_
- Better ride quality and stability _x000D_
- Designed for both asphalt and off-road _x000D_
- Inspired by motorsport _x000D_
- Gives your car more agressive, sporty look _x000D_
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
5 591.84 €
(w/o VAT:4 403.02 €)
(w/o VAT:4 403.02 €)
- SP2 mode adjust shocks add Soft and Performance modes
- Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
- Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
- Corner-specific shock absorber with race-inspired performance
- Smaller knob for 8 position additional hardness scale in the "select" mode
- Air Adjust Switch with 2 compression settings for large damping adjustments
- Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
- Increases vehicle stability
- 2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
- Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires
- 3/4” shaft to prevent shaft buckling
- Induction hardened chrome plated shaft resists rock damage and corrosion
- Oil - Gas separator prevents cavitation
- 1-piece Teflon piston
- Red Line full synthetic shock oil with high viscosity index to work in all temperatures
- Synthetic formula also contains special anti-wear and lubricity
- 1,000-hour salt spray corrosion resistance test on all hardware
- Built in-house at the TeraFlex Falcon Shock Division
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
6 581.28 €
(w/o VAT:5 182.11 €)
(w/o VAT:5 182.11 €)
_x000D_
- _x000D_
- SP2 mode adjust shocks add Soft and Performance modes _x000D_
- Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures _x000D_
- Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss _x000D_
- Corner-specific shock absorber with race-inspired performance _x000D_
- Smaller knob for 8 position additional hardness scale in the "select" mode _x000D_
- Air Adjust Switch with 2 compression settings for large damping adjustments _x000D_
- Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose _x000D_
- Increases vehicle stability _x000D_
- 2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation _x000D_
- Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tires _x000D_
- 3/4” shaft to prevent shaft buckling _x000D_
- Induction hardened chrome plated shaft resists rock damage and corrosion _x000D_
- Oil - Gas separator prevents cavitation _x000D_
- 1-piece Teflon piston _x000D_
- Red Line full synthetic shock oil with high viscosity index to work in all temperatures _x000D_
- Synthetic formula also contains special anti-wear and lubricity _x000D_
- 1,000-hour salt spray corrosion resistance test on all hardware _x000D_
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
6 581.28 €
(w/o VAT:5 182.11 €)
(w/o VAT:5 182.11 €)
- SP2 mode adjust shocks add Soft and Performance modes
- Soft is recommended for rough roads/trails, embedded rocks, expansion joints, and/or winter temperatures
- Performance setting recommended for maximum highway and/or off-road handling, stability, and control w/ minimal head toss
- Corner-specific shock absorber with race-inspired performance
- Smaller knob for 8 position additional hardness scale in the "select" mode
- Air Adjust Switch with 2 compression settings for large damping adjustments
- Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose
- Increases vehicle stability
- 2.25” shock body provides optimal performance, 6061-T6 aluminum alloy shock body providing superior heat dissipation
- Front shock features unique piggyback design with horizontal reservoir to increase clearance for large tyres,3/4” shaft to prevent shaft buckling
- Induction hardened chrome plated shaft resists rock damage and corrosion
- Oil - Gas separator prevents cavitation
- 1-piece Teflon piston
- Red Line full synthetic shock oil with high viscosity index to work in all temperatures
- Synthetic formula also contains special anti-wear and lubricity
- 1,000-hour salt spray corrosion resistance test on all hardware
- Built in-house at the TeraFlex Falcon Shock Division
Car brand:
Jeep
Where to install:
elöl, hátul
Out of stock
6 581.28 €
(w/o VAT:5 182.11 €)
(w/o VAT:5 182.11 €)
96
Product