without LED
(w/o VAT:2 748.2 €)
without LED
(w/o VAT:2 451.07 €)
(w/o VAT:2 732.2 €)
MorE4x4 Steel front bumper with winch plate Toyota Land Cruiser J90 / J95 1995-2002, all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 197.64 €)
without LED
(w/o VAT:2 748.2 €)
(w/o VAT:3 042 €)
without LED
(w/o VAT:2 748.2 €)
(w/o VAT:3 042 €)
MorE4x4 Steel front bumper with winch plate Toyota Hilux Revo 2015->, Rocco/Invincible 2020-> all engine version
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 597.01 €)
without LED
(w/o VAT:3 021.78 €)
(w/o VAT:3 347.36 €)
(w/o VAT:3 042 €)
2007-2018; 2017->
with lightbar and with front skid plate
(w/o VAT:2 688.86 €)
with lightbar and with front skid plate
without LED
(w/o VAT:2 397.95 €)
MorE4x4 Steel front bumper with winch plate Nissan Patrol Y61 (1997-2004), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 296.98 €)
MorE4x4 Steel front bumper with winch plate Toyota FJ Cruiser (2006+), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 197.64 €)
MorE4x4 Steel front bumper with winch plateeep Wrangler JL (2018+), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 010.74 €)
MorE4x4 Steel short front bumper with winch plateeep Wrangler JL (2018+), all engine
The More 4x4 steel bumper is an excellent protection for the car used for off-road against mechanical damage, as well as a safe method for mounting the winch.
The steel front bumper is made of 6, 4 and 3 mm thick sheet metal. It has a smooth mounting adjustment in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in daylight or fog lamp holders, reinforced mounts for shackle holders and a winch mounting plate, which is standard equipment on all MorE 4x4 front bumpers.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:800.5 €)
Snake4x4 Steel front bumber with winch plate for Jeep Wrangler JK (2007-)
Good quality laser cut black powder painted steel bumper
(w/o VAT:1 361.85 €)
Snake4x4 Front Steel Bumper with Winch Plate Jeep Wrangler JK 2007-2018
JUBILEE VERSION FOR THE 10TH ANNIVERSARY OF THE PRESENTATION OF THE RUBICON MODEL
High quality laser cut black powder coated steel bumper
There is room to mount the factory headlights
The corners of the bumper can be removed
Assembly instructions included.
48 kg without packaging
(w/o VAT:1 228.45 €)