MorE4x4 Steel rear bumper Toyota Hilux Vigo 2005-2015, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in fixtures for work lamps and reinforced fixings for shackle handles.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
MorE4x4 Steel rear bumper Toyota Land Cruiser J120 long 2002-2009, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
MorE4x4 Steel rear bumper Toyota Land Cruiser J125 short 2002-2009, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
MorE4x4 Steel rear bumper Toyota Land Cruiser J150 long 2009-2014 all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:1 116.47 €)
MorE4x4 Steel rear bumper Toyota Land Cruiser J95 long 1995-2002, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
MorE4x4 Steel rear bumper Toyota Land Cruiser J90 short 1995-2002, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
without LED light
(w/o VAT:2 204.02 €)
(w/o VAT:2 328.05 €)
MorE4x4 Steel rear bumper Toyota Hilux Revo 2016->; Rocco/Invincible 2020->, all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has two built-in fixtures for work lamps and reinforced fixings for shackle handles.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
RIVAL4x4 aluminum rear bumper Mitsubishi L200 2019->
without LED light
(w/o VAT:2 204.02 €)
(w/o VAT:2 328.05 €)
MorE4x4 Rear steel bumper for Nissan Patrol Y61 (1997-2004)
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
MorE4x4 Steel rear bumper Toyota FJ Cruiser (2006+), all engine
The steel rear bumper is made of sheet metal with a thickness of 6, 4 and 3 mm. It has smooth adjustment of the mounting in three planes, which significantly facilitates its installation in the vehicle. All external bolts on the bumper shells and at the lighting frames are made of stainless steel, and the bolts of the assembly system are made of galvanized steel.
The side parts of the bumper have supports bolted to the frame and apart from the possibility of precise adjustment of the bumper, they also play a very important role of the side supports, necessary for such long surfaces.
The bumper has a built-in fog lamp mount and reinforced mounts for shackle holders.
MorE4x4 bumpers are covered with "Cracked Desert" structural paint applied with the powder coating technique. This strong structure gives an effect similar to the RAPTOR coating.
(w/o VAT:980.02 €)
Snake4x4 rear steel bumper with spare wheel holder Jeep Wrangler JK 2007-2017
Good quality laser cut black powder coated steel bumper
(w/o VAT:1 894.34 €)
Snake4x4 hátsó acél lökhárító pótkeréktartóval Toyota Hilux Vigo 2005-15 Revo 2016+
Jó minőségű lézer vágott fekete porfestett acél lökhárító
(w/o VAT:1 606.86 €)
Snake4x4 rear steel bumper with led light Suzuki Jimny 2018-
Good quality laser cut black powder coated steel bumper
(w/o VAT:1 199.72 €)
Snake4x4 rear steel bumper with lighting (2x P21W 1x P21/5W) Suzuki Jimny 2018-
Good quality laser cut black powder coated steel bumper
(w/o VAT:352.11 €)
Snake4x4 rear aluminum bumper Suzuki Jimny 2018-
High quality laser cut black powder coated aluminum bumper
(w/o VAT:1 280.71 €)
(w/o VAT:1 036.72 €)
- Made from steel
- Solid construction
- Black finish
- Two large and durable steel hooks
- Protects vehicle from on & off-road debris
- Mounting point for license plate
Fits To: Wrangler JL 2 Door 18->;Wrangler JL 4 Door 18->;Wrangler JL 4XE 21->
(w/o VAT:1 021 €)